Advertisement
Sale
-
Breeze Shears 3 inch Carbon Steel Armature Bearing Puller Two legs Gear Removal Tool Set for Motorcycle Auto
Original price was: ₹550.00.₹350.00Current price is: ₹350.00. (Price inc. 18% GST)
-
XPT-411 MARBLE CUTTER 110MM XTRA POWER 1240W
Original price was: ₹5,679.00.₹2,699.00Current price is: ₹2,699.00. (Price inc. 18% GST)
-
Toolskart Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (8mm, 12pcs)
Original price was: ₹1,299.00.₹369.00Current price is: ₹369.00. (Price inc. 18% GST)
-
Breeze Shears Heavy Duty Manual Bar Bending Tool TMT Rebar Tool Construction Equipment Rod Bending Machine
Original price was: ₹3,999.00.₹1,999.00Current price is: ₹1,999.00. (Price inc. 18% GST)
Toolskart Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (12mm, 12pcs)
Original price was: ₹1,199.00.₹599.00Current price is: ₹599.00. (Price inc. 18% GST)
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
Related products
-
Toolskart Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (10mm, 12pcs)
Original price was: ₹1,599.00.₹499.00Current price is: ₹499.00. (Price inc. 18% GST)No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
-
XPT-425 DRILL MACHINE 10MM XTRA POWER 400W
Original price was: ₹2,999.00.₹1,550.00Current price is: ₹1,550.00. (Price inc. 18% GST)About this item
Connects with a 10 mm drill
High performance 400 watts of motor
Structured for ease during extended work
Metal gear built for extra stability of the tool
The versatile body can be used for long with no exhaustion
Package Contents
1 unit Drill Machine
1 unit Key Chuck
1 Pair Carbon Brush
1 unit User Manual -
Toolskart 4 inch Magnetic Clamp Right Angle for holding welding equipment
Original price was: ₹699.00.₹259.00Current price is: ₹259.00. (Price inc. 18% GST)“Breeze Shears Compact angled arrow design to maintain sheets and tubes at angles of 45, 90 and 135 degrees. Double-sided brackets for welding and assembly work. Fit for: brackets and positioners in welding, welding, marking, pipe installation. The welding magnet is designed as an extra hand that can hold black objects quickly and accurately. Best suited for welding angled joints”
-
Toolskart Coil Winding Machine Die Set. Plastic Farma for Motor Copper Coil Winding Machine 0.5 HP
Original price was: ₹300.00.₹250.00Current price is: ₹250.00. (Price inc. 18% GST)Plastic die/farma for coil winding machine, copper winding machine accessory. Size : 0.5HP
