Sale
-
Breeze Shears Motorized Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹135,592.37.₹114,406.78Current price is: ₹114,406.78. (₹135,000.00 Price inc. 18% GST)
-
Breeze Shears Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹29,661.02.₹25,422.88Current price is: ₹25,422.88. (₹29,999.00 Price inc. 18% GST)
-
Hydraulic Pipe Bending Machine for 1/2" 3/4" 1" 1 1/4" 2" size pipes, with dies bending upto 34mm with 10 Ton Capacity
Original price was: ₹22,033.05.₹16,101.69Current price is: ₹16,101.69. (₹19,000.00 Price inc. 18% GST)
-
Breeze Shears 3in1 Bending, Shearing and Rolling Machine Size 8 inch
Original price was: ₹22,033.05.₹15,253.39Current price is: ₹15,253.39. (₹17,999.00 Price inc. 18% GST)
-
BOSCH GCO 220 Professional Electric Chop Saw | Powerful Cut Off Saw Machine | C-Handle | Rated Power of 2200 W| Speed upto 3800 RPM |Long Lifespan |Disc Diameter 355 mm (14 Inch)
Original price was: ₹16,948.31.₹10,847.46Current price is: ₹10,847.46. (₹12,800.00 Price inc. 18% GST)
-
XPT-517 DEMOLITION HAMMER XTRA POWER 1700W
Original price was: ₹18,644.07.₹10,829.66Current price is: ₹10,829.66. (₹12,779.00 Price inc. 18% GST)
-
Breeze Shears Sheet and Plate Shearing Machine heavy Duty 47R Model Cutting Capacity upto 5 mm MS and SS sheets/plates size 14"
Original price was: ₹15,168.64.₹10,593.22Current price is: ₹10,593.22. (₹12,500.00 Price inc. 18% GST)
-
Breeze Shears mini Sheet Rolling Machine upto 2 foot length, Insulation Works
Original price was: ₹13,550.00.₹10,593.22Current price is: ₹10,593.22. (₹12,500.00 Price inc. 18% GST)
Toolskart Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (10mm, 12pcs)
Original price was: ₹1,355.08.₹422.88Current price is: ₹422.88. (₹499.00 Price inc. 18% GST)
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
Related products
-
XPT-421 DRILL MACHINE 10MM XTRA POWER 650W
Original price was: ₹4,236.44.₹1,694.92Current price is: ₹1,694.92. (₹2,000.00 Price inc. 18% GST)Add to cartXPT-421 DRILL MACHINE 10MM XTRA POWER 650W
About this item
Holds 10mm drill
Powerful 650-watts motor
Realistic template for daily work
More effective for screw driving action
The solid and compact body makes it easy to use
High-quality dependable machine body improves survival and improves tool life
Package Contents
1 unit Drill Machine
1 unit side Handle
1 unit Key Chuck
1 unit Scale Plate
1 Pair Carbon Brush
1 unit User ManualWhatsapp us -
XPT-411 MARBLE CUTTER 110MM XTRA POWER 1240W
Original price was: ₹4,812.71.₹2,287.29Current price is: ₹2,287.29. (₹2,699.00 Price inc. 18% GST)Add to cartXPT-411 MARBLE CUTTER 110MM XTRA POWER 1240W
About this item
Backs a 110mm disc
High-efficiency 1240 watts motor
Structured for ease during extended work
Modular body for use with low exhaustion
Metal gear case housing for increased durability of the tool
Package Contents
1 unit Marble Cutter
1 unit Rubber Water Nozzle
1 unit Plastic Nozzle
1 unit Pipe
2 units Wrench
1 Pair Carbon Brush
1 unit User ManualWhatsapp us -
Toolskart 4 inch Magnetic Clamp Right Angle for holding welding equipment
Original price was: ₹592.37.₹219.49Current price is: ₹219.49. (₹259.00 Price inc. 18% GST)Add to cart“Breeze Shears Compact angled arrow design to maintain sheets and tubes at angles of 45, 90 and 135 degrees. Double-sided brackets for welding and assembly work. Fit for: brackets and positioners in welding, welding, marking, pipe installation. The welding magnet is designed as an extra hand that can hold black objects quickly and accurately. Best suited for welding angled joints”
Whatsapp us -
XPT-440 BLOWER XTRA POWER
Original price was: ₹2,965.25.₹1,186.44Current price is: ₹1,186.44. (₹1,400.00 Price inc. 18% GST)Add to cartAbout this item
Variable pace, switch included
Motor inrush power of 500-watts
Provides air volume of 2.3M3/ Min
Compact and practically designed body
Easy-grip allows you to work continuously
Package Contents
1 unit Electric Blower
1 unit Sack
1 unit Pipe Ring
1 unit Iron Bar
1 unit Blow Pipe
1 Pair Carbon Brush
1 unit User ManualWhatsapp us
