At Dealer Price
-
Xtra Power Cutting Wheels
Price on Request
-
ToolsPro Star Screw Knob Handles Male Thread Clamping Knobs M6 M8 M10 M12
Price range: ₹26.00 through ₹40.00 (GST 18% Extra)
-
ToolsPro 18mm Cutter Knife Plastic Grip Hand Held Paper Cutter
Original price was: ₹299.00.₹45.00Current price is: ₹45.00. (GST 18% Extra)
-
ToolsPro Knife Wire Brush Cleaning Brush for Rust Paint Removal
Original price was: ₹510.00.₹72.00Current price is: ₹72.00. (GST 18% Extra)
-
ToolsPro T Handle Socket Spanner Set 6mm to 14mm for Garage Home Repair
Original price was: ₹299.00.₹75.00Current price is: ₹75.00. (GST 18% Extra)
-
Handle Wire Brush Set 3 Pieces Cleaning Brush Kit
Original price was: ₹399.00.₹90.00Current price is: ₹90.00. (GST 18% Extra)
More Deals
-
Tap and Die Set 8 Pc Compact Threading Tool Kit
Original price was: ₹999.00.₹510.00Current price is: ₹510.00. (GST 18% Extra)
-
Breeze Shears Hand Shearing Machine Bench Shear for SS and MS sheets size 10 inch
Original price was: ₹9,999.00.₹5,800.00Current price is: ₹5,800.00. (GST 18% Extra)
-
Silicone Gun Aluminium 15 Inch Sealant Caulking Gun
Price on Request
-
ToolsPro Heavy Duty Drill Press Export Quality Vice Size 5 inch
Original price was: ₹8,999.00.₹4,500.00Current price is: ₹4,500.00. (GST 18% Extra)
-
Adjustable Hole Saw Circle Cutter 30–200mm Round Hole Cutting Tool for Wood
Original price was: ₹900.00.₹390.00Current price is: ₹390.00. (GST 18% Extra)
-
ToolsPro Pipe Wrench, Stilson Type Pipe Wrenches, Pipe Wrench for Plumbing (18 Inch)
Original price was: ₹789.00.₹545.00Current price is: ₹545.00. (GST 18% Extra)
-
INGCO Angle Grinder, 100mm | 750W | 12000 RPM Power Grinder, Electric Metal Grinder with 1pcs Auxiliary Handle
Price on Request
-
Chain Puller Mechanical Bike Bicycle Chain Removal and Pulling Tool
Original price was: ₹599.00.₹150.00Current price is: ₹150.00. (GST 18% Extra)
-
Reflective Safety Jackets High Visibility Green Waistcoat for Traffic, Running, Cycling Sports with 2 Inch Reflective Tape (pack Of 20)
Original price was: ₹2,000.00.₹800.00Current price is: ₹800.00. (GST 18% Extra)
-
Nut Cutter 12-22mm Heavy Duty Nut Splitter Tool
Price on Request
-
Bench Vice Cast Iron Fixed Base 100 mm Jaw Width 4 No
Original price was: ₹2,899.00.₹1,600.00Current price is: ₹1,600.00. (GST 18% Extra)
-
ToolsPro Knife Wire Brush Cleaning Brush for Rust Paint Removal
Original price was: ₹510.00.₹72.00Current price is: ₹72.00. (GST 18% Extra)
-
Chalk Liner Marking Tool for Construction and Carpentry
Price on Request
-
Locking Plier 10 Inch Curved Jaw Heavy Duty Vise Grip
Original price was: ₹899.00.₹250.00Current price is: ₹250.00. (GST 18% Extra)
-
Heavy Duty Stapler with Pins for Industrial, Woodworking and Office Packaging
Original price was: ₹899.00.₹380.00Current price is: ₹380.00. (GST 18% Extra)
Heavy Duty
-
Breeze Shears Motorized Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹159,999.00.₹135,000.00Current price is: ₹135,000.00. (GST 18% Extra)
-
Breeze Shears Sheet Rolling Machine for Insulation works size 5 foot
Original price was: ₹35,000.00.₹29,999.00Current price is: ₹29,999.00. (GST 18% Extra)
-
Hydraulic Pipe Bending Machine for 1/2" 3/4" 1" 1 1/4" 2" size pipes, with dies bending upto 34mm with 10 Ton Capacity
Original price was: ₹25,999.00.₹19,000.00Current price is: ₹19,000.00. (GST 18% Extra)
-
Breeze Shears 3 in 1 Bending, Shearing and Rolling Machine Size 8 inch
Original price was: ₹25,999.00.₹16,000.00Current price is: ₹16,000.00. (GST 18% Extra)
-
BOSCH GCO 220 Professional Electric Chop Saw | Powerful Cut Off Saw Machine | C-Handle | Rated Power of 2200 W| Speed upto 3800 RPM |Long Lifespan |Disc Diameter 355 mm (14 Inch)
Price on Request
-
XPT-517 DEMOLITION HAMMER XTRA POWER 1700W
Price on Request
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (12mm, 12pcs)
Original price was: ₹1,199.00.₹599.00Current price is: ₹599.00. (GST 18% Extra)
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
Related products
-
XPT-411 MARBLE CUTTER 110MM XTRA POWER 1240W
Price on RequestAdd to cartXPT-411 MARBLE CUTTER 110MM XTRA POWER 1240W
About this item
Backs a 110mm disc
High-efficiency 1240 watts motor
Structured for ease during extended work
Modular body for use with low exhaustion
Metal gear case housing for increased durability of the tool
Package Contents
1 unit Marble Cutter
1 unit Rubber Water Nozzle
1 unit Plastic Nozzle
1 unit Pipe
2 units Wrench
1 Pair Carbon Brush
1 unit User Manual -
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (8mm, 12pcs)
Original price was: ₹1,299.00.₹369.00Current price is: ₹369.00. (GST 18% Extra)Add to cartNo expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
-
ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (10mm, 12pcs)
Original price was: ₹1,599.00.₹499.00Current price is: ₹499.00. (GST 18% Extra)Add to cartNo expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.
