XPT-412 MARBLE CUTTER 110MM XTRA POWER 1100W

Related products

• Sale!

  ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (12mm, 12pcs)

  ₹1,199.00 Original price was: ₹1,199.00.₹599.00Current price is: ₹599.00. (GST 18% Extra)

  No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.

  Add to cart
  Request Price
• Sale!

  XPT-436 DEMOLITION HAMMER 17MM XTRA POWER 1080W

  Price on Request

  XPT-436 DEMOLITION HAMMER 17MM XTRA POWER 1080W
  About this item
  Easy handheld style
  Configured with a chisel bit
  Holds a hex chisel of 17mm
  The motor capacity of 1080-watts
  Enduring use of such a comfortable body
  Hard metal gearing for performance gains and increased product life
  Package Contents
  1 unit Demolition Hammer
  2 units Grease
  2 units Chisel (1 Pointed & 1 Flat)
  1 unit Wrench
  1 Pair Carbon Brush
  1 unit Carrying Case
  1 unit User Manual

  Add to cart
  Request Price
• Sale!

  ToolsPro 20 Pcs Pack, M8 x 25mm Hex Head bolt With Nut & Washer, Zinc-Coated 8mm thickness and 25mm length

  ₹1,272.00 Original price was: ₹1,272.00.₹720.00Current price is: ₹720.00. (GST 18% Extra)

  Toolskart Hex bolts, also called hexagon screw head bolts, hex cap bolts, hex-cap screws, or machine bolts, are a very common choice when it comes to construction and repair. Hexagon screw head bolts come in a large variety of sizes and diameters. The best way to choose the right hex bolt is to find the bolt material that best suits your need ,Hex Nut are internally threaded and have a hex drive for nearly all general applications. It is most commonly used nut for wide range applications. Hex Nuts are used in any application with a mating male threaded machine bolt or screw. Can be used with any fastener with a machine screw thread. Hex Nuts are used with compatible sized bolts and washers,Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer. These washers help to prevent bolts or nuts from pulling through a surface,Split lock washers are made of hardened steel with a bent surface so that the deformation of the washers under stress will prevent bolt loosening

  Add to cart
  Request Price
• Sale!

  ToolsPro Wall Anchor Bolt Fastener Rust-Proof bolt for Concrete Walls (8mm, 12pcs)

  ₹1,299.00 Original price was: ₹1,299.00.₹369.00Current price is: ₹369.00. (GST 18% Extra)

  No expansion forces – unlike plugs or anchors – you can place nearer the edge without risk of fracturing Eliminates line-up problems – drill the pilot hole direct into material and substrate, Suitable for a variety of substrates – concrete, solid, perforated, or hollow bricks, natural stone, marble, etc New easy fix – relief thread is easier to tighten especially at lower torque than traditional plugged fixings Cuts a thread into base material – because there is no need to insert the plugging quality self-tapping concrete anchors that cut a thread directly into pre-drilled pilot holes, no anchor or plug is needed. Self-tapping anchors are an excellent way to fasten a wide range of materials to masonry. Really easy to use. Just drill a pilot hole (see the technical information below for appropriate diameter) and use a socket wrench or spanner to tighten the screw, into concrete, natural stone, solid or perforated bricks, hollow blocks, etc. The anchor has a high low relief thread to aid the removal of dust and ease insertion. The threaded anchor and self-tapping action allow for safe anchorage, with the substrate becoming the nut to the bolt this utilizes a tried and tested method for metals and wood to a broader selection of materials. They can be reversed and reused in the same hole as it has cut the thread. Suitable for fixing timber battens/counter battening, window/door frames, machinery to the floor, wall plates, signs, etc. Brackets or handrails, ducting, satellite dishes, aerials, trunking, etc. In fact, anywhere a fixing to concrete or masonry is required.

  Add to cart
  Request Price